Sony A7 III / A7R III V.3 series 40M/130FT Underwater camera housing with 67mm threaded flat port for FE 90mm macro lens (focus gear included) and standard port bundle. White
Sony A7 III / A7R III V.3 series 40M/130FT Underwater camera housing with 67mm threaded flat port for FE 90mm macro lens (focus gear included) and standard port bundle. White
Sony A7 III / A7R III V.3 series 40M/130FT Underwater camera housing with 67mm threaded flat port for FE 90mm macro lens (focus gear included) and standard port bundle. White
SeaFrogs 40M/130FT Underwater camera housing for Sony A7 III / A7R III with 67mm threaded flat port for FE 90mm macro lens (focus gear included) and standard port bundle.
Created specifically for underwater macro photography and videography with Sony FE 90mm macro lens, including the ability to focus in auto or manual mode by using included focus gear, and attach wet lenses and the other accessories with 67mm thread.
Some camera functions are not available inside the unit: - Front Dial below the shutter release button - Joystick button
Compatible lenses (standard port):
Sony FE 16-35mm F/4 ZA OSS(Autofocus only, Manualzoom gear included) - Works from 17mm to 35mm
Sony FE 24-70mm F/4 ZA OSS (No zoom available, use at 24mm only)
Sony FE 24mm F1.4 GM (Autofocus only)
Sony FE 28-70mm F3.5-5.6 OSS (Autofocus only, Manualzoom gear included)
Sony FE 50mm F1.8 (Autofocus only)
Sony FE 50mm F2.8 Macro (Autofocus only)
Sony FE 35mm F1.4 GM Lens (Autofocus only)
Sony FE 55mm F1.8 ZA Carl Zeiss Sonnar T* (Autofocus only)
Sony FE 85mm F1.8 (Autofocus only)
Compatible lenses (67mm threaded flat long port):
Sony FE 90mm f/2.8 Macro G OSS (manual focus gear included)
Materials :
Polycarbonate
ABS plastic
Optical glass
Stainless steel
EPDM rubber
O'ring sealed buttons with spring
Key features:
Vacuum Pump System port
High-quality optical viewfinder
Inbuilt leak detection sensor
Interchangeable port system
Synchro cable port
Dual Fiber-Optic port (Sea&Sea type)
Multi-coated optical glass standard flat port
Stainless steel mounting plate 1/4" Thread
Reinforced metallic bottom plate
In order to connect an external strobe with this housing, it will require to use a Dual 5-Pin Sync Cord (purchase here) or a Single 5-Pin Sync Cord (purchase here), or a Fiber-optic cable (purchase here)