6" Dry Dome Port V.10 with a lens shade. Created specifically for underwater photography.
The primary application of this underwater housing is underwater photography/videography. However, it can do a lot more by protecting your camera from weather hazards such as rain, dust, snow, etc. Because of its compact size and near all functionality, it is an ideal item to have while traveling.
Compatible lenses (Dome port)
Sony FE 12-24mm F4G (Autofocus only, Manualzoom gear included)
Sony FE 24mm F1.4 GM (No manual focus available)
Sony Distagon T* FE 35mm F1.4 ZA (No manual focus available)
Sony FE 16-35mm F/4 ZA OSS (Autofocus only, Manualzoom gear included)
Sony FE 24-70mm F/4 ZA OSS (Autofocus only, Manual zoom gear - purchase here)
Sony FE 28mm F2 + Ultra Wide Converter SEL075UWC (No manual focus available)
Sony FE 28-70mm F3.5-5.6 OSS (Autofocus only, Manual zoom gear included)
Tamron 17-28mm F2.8 Di III RXD (Autofocus only, Manual zoom gear - purchase here)
Sigma 14-24mm F2.8 DG DN Art (Autofocus only, No manual zoom gear)
Sigma 35mm F1.4 e mount (Manual focus gear - purchase here)
Compatible lenses (Standard port)
Sony FE 16-35mm F/4 ZA OSS (Autofocus only, Manual zoom gear included) - Works from 17mm to 35mm
Sony FE 24-70mm F/4 ZA OSS (No zoom available, use at 24mm only)
Sony FE 24mm F1.4 GM (No manual focus available
Sony FE 28-70mm F3.5-5.6 OSS (Autofocus only, Manual zoom gear included)
Sony FE 50mm F1.8 (No manual focus available)
Sony FE 50mm F2.8 Macro (No manual focus available)
Sony FE 35mm F1.4 GM Lens (Autofocus only)
Sony FE 55mm F1.8 ZA Carl Zeiss Sonnar T* (No manual focus available)
Sony FE 85mm F1.8 (No manual focus available)
Materials :
Polycarbonate
ABS plastic
Optical glass
Stainless steel
EPDM rubber
O'ring sealed buttons with spring
Optical acrylic
Key features:
Vacuum Pump System port
High-quality optical viewfinder
Inbuilt leak detection sensor
Interchangeable port system
Synchro cable port
Dual Fiber-Optic port (Sea&Sea type)
Standard flat port (Optical glass)
6" Dry dome port (Optical acrylic)
Stainless steel mounting plate 1/4" Thread
40m / 130ft Dept rate
Reinforced metallic bottom plate
In order to connect an external strobe with this housing, it will require to use a Dual 5-Pin Sync Cord (purchase here) or a Single 5-Pin Sync Cord (purchase here), or a Fiber-optic cable (purchase here) with a Flash trigger (purchase here)