My shopping cart
Your cart is currently empty.
Continue ShoppingSea Frogs Salted Line Series Sony A1 40M/130FT Waterproof camera housing with 8" Dome port V.8. White
White, Optical acrylic 8" Dome port V.8
Also available on the European website
The Salted Line housing for Sony A1 cameras offers a durable hybrid design, making it suitable for underwater photography. It is rated for depths of up to 40 meters (130 feet), providing consistent performance in demanding conditions such as strong waves and shore breaks.
The Sea Frogs Salted Line A1 housing provides full control of all camera functions, except the joystick and drive/focus mode dials. It includes an 8-inch optical acrylic dome port V.8 with the shortest available extension ring adapter 23mm. Its standard 90mm bayonet mount works with most Sea Frogs dry flat and dome ports, excluding those for A6xxx and RX1xx housings.
Durable stainless steel latches with locking pins.
Larger LCD screen window improves visibility.
Compatibility with a detachable 2-stage shutter grip trigger.
The control buttons feature 50% stiffer springs for enhanced feedback and precise control. Designed for underwater and surf photography, this housing is durable and easy to use, making it perfect for Sony A1 users in tough conditions.
Sony FE 28mm F2 (autofocus only)
Sony FE 28mm F2 + Fisheye Converter (autofocus only)
Sony FE 14mm F1.8 GM (autofocus only)
Sony FE 20mm F1.8G (autofocus only)
Samyang AF14mm F2.8 FE (autofocus only)
Along with the zoom gear selected above you may also purchase the following:
Width: 19cm (7.5")
Height: 18cm (7")
Length: 12cm (4.7")
Weight: ±1100 GR (2.4 LBS)
Extremely positive (Hand strap required)
Polycarbonate
Optical acrylic
ABS plastic
Stainless steel
EPDM rubber
Vacuum Pump System port
High-quality optical viewfinder
Inbuilt leak detection sensor
Interchangeable port system
Synchro cable port
Dual Fiber-Optic port (Sea&Sea type)
Two stainless steel mounting plates 1/4" thread
The reinforced metallic bottom plate
Dual-sided metal latch locking system
Detachable Shutter grip with 2-stage trigger (Not Included)
O-ring sealed buttons with spring
To connect an external strobe with this housing, it will require the use of a Dual 5-pin Sync Cord (purchase here),a Single 5-pin Sync Cord (purchase here), or a Fiber-optic cable (purchase here),with a Flash trigger (purchase here),
Underwater housing for Sony A1
8" acrylic dome port V.8
Spare O-rings set
Silicone grease 5ml
Housing body cap
Dome port cap (back)
© 2025 SALTED LINE | Theme by Mile High Themes | Powered by Shopify